Custom Fit Pocket Door Frame

Ordering is simple. Complete the order form below!

Regular price $ 187.00

Processing lead time can be approximately 2-3 weeks.

Our set up pocket door frame that we make in house, all the wood that is used in the pocket door frame is pine. To give it the strength and to make it more rigid, there are 2 galvanized steel extrusions that are applied in the frame construction. On the bottom of the pocket door frame, there is a metal plate that is applied when assembled that the customer will use to nail down the pocket frame to their finished floor. There is also one rubber bumper so when the door is shut in the opening, to give it a soft, quiet sound.

The track that runs the door is made of galvanized steel on a standard pocket door frame. On a heavy-duty pocket door frame, it is aluminum. In a standard pocket door frame of hardware (150 lb), it contains 2 non-ball-bearing rollers and 2 plates that attach to the top of the doors and a set of aligners that are put on the lower edge to guide the door in and out of the opening. On a heavy-duty bag (225 lb), everything is the same except that the rollers are ball-bearing.

Select your jamb size, closure options, and track capacity. 

View Installation Steps Here

Industry Standard is that you add at least 2" to the overall dimension of the door size, to determine your RO. For example, if you order (1) 30"W x 80"H size door, your RO needs to be at least 32"W x 82"H for a single door application. If you are ordering for a double door application, and want to use (2) 30"W x 80"H size doors inside your one opening, your RO needs to be at least 62"W x 82"H.

Door to Door Co. Commercial Affiliate Program

Offering special pricing for commercial orders and frequent purchases to construction, remodeling and property management professionals.

Click here to learn more!

Our doors are prepped and pre-hung in our facility to ensure that everything fits perfectly based on your specifications. For safe shipping, we package them knocked down/flat with the hinge jamb attached for a cost effective and safe transit to your home or job site.

Fill out the form below to add the prehung option to your order. All double door prehung doors will add an additional door to your cart. Please note that any doors 16" and under in width may not be bored as the stile is too narrow. Select your double doors as 1/2 the width size needed for a full application. (i.e. 30" Wide Finished opening measurement, please select 15" Doors and select double door configuration.

Jamb Kit Details:

  • Can purchase jamb kit separately for Bore, Mortise, and Hinges
  • Jamb Kit acts as prehung - just ships flat w/easy assembly
  • Jamb Kit material is 5/8" thick for each piece
  • Jamb Kit sides are 82" long for any 6'8" size ordered, then 98" long for any 8'0 size ordered.
  • The header width is determined by the size of the door or doors (if double door application).
  • Jamb Kit material is flat jambs.
  • Jamb Kit material is available in primed or solid, stain-grade pine. Sizes are 4-5/8" or 6-5/8".

*Hardware is not applicable for the Door to Door return policy. Please contact customer support with any questions.

Standard Shipping Estimates*
Quantity Standard Price Price West of Rockies**
1 $194 $272
2 $219 $307
3 $282 $395
4 $324 $454
5-10 $286 $401
11-15 $321 $449
16-19 $380 $532
20-31 $426 $596
32+ 385 $539
* Shipments to NY and CA may be subject to an additional $100 freight fee.
** AZ, CA, CO, ID, MT, NV, NM, OR, UT, WA, WY. Please visit our Shipping page to learn more

Your cart

Your cart is empty

Processing lead time can be approximately 2-3 weeks.

Our set up pocket door frame that we make in house, all the wood that is used in the pocket door frame is pine. To give it the strength and to make it more rigid, there are 2 galvanized steel extrusions that are applied in the frame construction. On the bottom of the pocket door frame, there is a metal plate that is applied when assembled that the customer will use to nail down the pocket frame to their finished floor. There is also one rubber bumper so when the door is shut in the opening, to give it a soft, quiet sound.

The track that runs the door is made of galvanized steel on a standard pocket door frame. On a heavy-duty pocket door frame, it is aluminum. In a standard pocket door frame of hardware (150 lb), it contains 2 non-ball-bearing rollers and 2 plates that attach to the top of the doors and a set of aligners that are put on the lower edge to guide the door in and out of the opening. On a heavy-duty bag (225 lb), everything is the same except that the rollers are ball-bearing.

Select your jamb size, closure options, and track capacity. 

View Installation Steps Here

Industry Standard is that you add at least 2" to the overall dimension of the door size, to determine your RO. For example, if you order (1) 30"W x 80"H size door, your RO needs to be at least 32"W x 82"H for a single door application. If you are ordering for a double door application, and want to use (2) 30"W x 80"H size doors inside your one opening, your RO needs to be at least 62"W x 82"H.

Door to Door Co. Commercial Affiliate Program

Offering special pricing for commercial orders and frequent purchases to construction, remodeling and property management professionals.

Click here to learn more!

Our doors are prepped and pre-hung in our facility to ensure that everything fits perfectly based on your specifications. For safe shipping, we package them knocked down/flat with the hinge jamb attached for a cost effective and safe transit to your home or job site.

Fill out the form below to add the prehung option to your order. All double door prehung doors will add an additional door to your cart. Please note that any doors 16" and under in width may not be bored as the stile is too narrow. Select your double doors as 1/2 the width size needed for a full application. (i.e. 30" Wide Finished opening measurement, please select 15" Doors and select double door configuration.

Jamb Kit Details:

  • Can purchase jamb kit separately for Bore, Mortise, and Hinges
  • Jamb Kit acts as prehung - just ships flat w/easy assembly
  • Jamb Kit material is 5/8" thick for each piece
  • Jamb Kit sides are 82" long for any 6'8" size ordered, then 98" long for any 8'0 size ordered.
  • The header width is determined by the size of the door or doors (if double door application).
  • Jamb Kit material is flat jambs.
  • Jamb Kit material is available in primed or solid, stain-grade pine. Sizes are 4-5/8" or 6-5/8".

*Hardware is not applicable for the Door to Door return policy. Please contact customer support with any questions.