Single Panel Shaker Style Bifold Door (Primed)

Next Product

Product Description

Shaker style is known for its impeccable craftsmanship, careful attention to detail and simplicity of design. The minimalism characteristic of this style is evident in our line of Shaker doors. These Shaker doors are ideal for anyone looking to add traditional or craftsman style to their home.

This door features a single-panel design on 1-3/8" pine. The panels are stacked in a traditional Shaker style. The door comes in a variety of heights and widths to suit most any space in your home. The primed surface still needs to be properly prepared with light sanding before adding paint. Bifold is shown with brass hinges but are now sold with white hinges only.

Our pine bifold doors are made with solid stiles(sides) and rails, allowing some room for trimming; however, the tolerance is minimal as too much trimming may affect the integrity of the door. Please contact customer service to confirm cuts or receive a quote for special dimensions.

Door stiles (sides) and rails (horizontal portion) are made of engineered solid core pine. The inlaid portion of the Shaker style is made with solid MDF.

Single unit bifolds with widths of 48”, 60”, and 72” are on the same track. Actual width of bifold doors are slightly less than indicated to allow for proper installation – i.e. 24” wide by 80” high actually measures 11-13/16” wide per panel by 79” high. 24” wide by96” high actually measures 11-13/16” wide per panel by 95” high.

Bifolds include overhead track and hardware for each unit.

View Specs

Features of our primed doors:

No raised wood grain when painting – smoother finish.
No veneer bubbles from water based paints.
MDF stile and rail veneers are a much harder surface than pine, less susceptible to dents or damage.
Water based (latex) paints can be used on the primed doors. Oil based primer and paint is not required on the primed doors as it is on the clear pine doors. This can reduce painting expense.

These doors are made from veneered engineered solid core pine wood. The inner core is made of hardwood in a cross grain pattern bonded together under heat, pressure and glue. The result is a stronger product that limits cracking and splitting of the wood material. Unfinished pine doors require oil-based finishing. For more information, see our Finishing page.

Door to Door Co. Commercial Affiliate Program

Offering special pricing for commercial orders and frequent purchases to construction, remodeling and property management professionals.

Click here to learn more!

Are you a professional? Click Here

**All bifold doors include track and hardware**

Looking for a special size? We offer custom ordering options on all our doors. Contact info@doortodoorco.com to inquire. Please note that discounts are not available on custom orders.

$ 263.00

Standard Shipping Estimates*
Quantity	Standard Price	Price West of Rockies**
1	$194	$272
2	$219	$307
3	$282	$395
4	$324	$454
5-10	$286	$401
11-15	$321	$449
16-19	$380	$532
20-31	$426	$596
32+	385	$539

* Shipments to NY and CA may be subject to an additional $100 freight fee.
** AZ, CA, CO, ID, MT, NV, NM, OR, UT, WA, WY. Please visit our Shipping page to learn more

F.A.Q.

Doors that come in Clear/Stain-Grade MUST be finished in a timely manner (we highly recommend within 2-3 weeks), with an OIL-BASED product only. If left unfinished, any humidity, heat, or other naturally occurring environmental elements could affect the integrity of the door.
Doors that come primed still need some prep work before painting. We recommend filling in any slight dings or scratches that may occur during shipping with wood putty (this is common). Next, you will lightly sand with fine grit sandpaper and remove dust with a soft, dry cloth. Now you are ready to apply any water based product.

We recommend to start taking pictures immediately of how your order is received when the truck driver opens the truck's rear door.
If crate is in good condition, you can sign the paperwork and release the driver.
If crate looks damaged or questionable, hold driver without signing paperwork. Please inspect items to see if there is damage that may have occurred during shipping. TAKE PLENTY OF PICTURES up close and full image of door(s) to help document and resolve issues quickly.
If there is damage, you MUST notify us within 8 hours with pictures to show damage. We will start any claims with the freight company and get your replacement sent out as quickly as possible.
Please read full disclosure for our Shipping/Receiving stated at the bottom of our web page.
We are given a short time frame from the freight companies to report any damage. If you wait longer than the 8 hour time frame, we may not be able to replace damaged items without charging the full amount again.

The processing lead time for our bifolds and slab doors is 7-10 Business days, with 1-5 additional Business days for delivery.
The processing lead time for our door with jamb kits is 15-20 Business days, with 1-5 additional Business days for delivery.
We offer expedited PROCESSING for an additional fee. Please contact us for a quote.

Yes, but there is a 25% restocking fee for any items ordered up to 80" tall. There is a 30% restocking fee for any items ordered in the 96" height. Any custom orders, including jamb kits, Hardware, and Exterior Fiberglass doors are non-returnable.
The customer is responsible for S & H fees to return item(s), must take pictures of how item(s) are packed to be shipped back. Once item(s) are received, the customer will get a refund ONLY if the item(s) are in perfect condition.

You can purchase knobs separately: https://www.doortodoorco.com/collections/knobsets
Hinges are included in any jamb kit purchase.
If wanting to purchase additional hinges, please contact us.
Doors are shown priced as slabs only with no bore or mortise. If you wish to purchase a jamb kit (act as prehung-just ship flat with easy assembly), you can do so for an additional cost. Jamb kits come with the two sides/header, bore for door knob, mortise for hinge placement in the jamb material and door, and the (3) hinges per door.

Yes, but please consider the following scenarios:
Standard door heights are 80" tall and fit inside standard door frames.
Standard barn door heights are 84" tall since they are hung outside and above the door frame.