Puerta exterior de una hoja sobre panel elevado de 3/4"

Industry Standard is that you add at least 2" to the overall dimension of the door size, to determine your RO. For example, if you order (1) 30"W x 80"H size door, your RO needs to be at least 32"W x 82"H for a single door application. If you are ordering for a double door application, and want to use (2) 30"W x 80"H size doors inside your one opening, your RO needs to be at least 62"W x 82"H.

*Please note, 6-5/8" jamb kit materials for 8'0 doors are temporarily out of stock.

With our RapidHang™ system, doors are prepped and pre-hung in our facility to ensure that everything fits perfectly based on your specifications. We then disassemble them and ship them flat with the hinge jamb attached for a cost effective and safe transit to your home or job site.

Fill out the form to add the prehung option to your order. All double door prehung doors will add an additional door to your cart. Please note that any doors 16" and under in width may not be bored as the stile is too narrow. Select your double doors as 1/2 the width size needed for a full application. (i.e. 30" Wide Finished opening measurement, please select 15" Doors and select double door configuration.

RapidHang™ Details:

• Can purchase jamb kit separately for Bore, Mortise, and Hinges
• Jamb Kit acts as prehung - just ships flat w/easy assembly
• Jamb Kit material is 5/8" thick for each piece
• Jamb Kit sides are 82" long for any 6'8" size ordered, then 98" long for any 8'0 size ordered.
• The header width is determined by the size of the door or doors (if double door application).
• Jamb Kit material is flat jambs.
• Jamb Kit material is available in primed or solid, stain-grade pine. Sizes are 4-5/8" or 6-5/8".

Disclaimer on Product Specifications and Order Fulfillment

Please note that all products sold and fulfilled through this website are manufactured and processed according to Door to Door Co’s own specifications, standards, and diagrams. It is the responsibility of the customer to reference our provided materials and guides when placing an order.

Handing and swing direction, along with all other product configurations, follow our internal standards as outlined in our ordering resources. These may differ from general industry norms or external references.

Door to Door Co. is not responsible for errors resulting from assumptions based on third-party images, terminology, or standards not explicitly provided by us. By placing an order, you acknowledge that you have reviewed and understood our ordering guidelines.

If you have any questions or need clarification prior to ordering, we encourage you to contact our team directly.

Features of our primed doors:

1. No raised wood grain when painting – smoother finish.
2. No veneer bubbles from water based paints.
3. MDF stile and rail veneers are a much harder surface than pine, less susceptible to dents or damage.
4. Water based (latex) paints can be used on the primed doors. Oil based primer and paint is not required on the primed doors as it is on the clear pine doors. This can reduce painting expense.